LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry LE, FWD >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belt - Service Information (Except Hybrid) >> REAR SEAT INNER BELT ASSEMBLY (for RH Side) >> Installation [06/2017 - 09/2019] >> Procedure

Installation [06/2017 - 09/2019]: Procedure

  1. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (for TMC Made) 
    1. Install the rear seat inner with center belt assembly RH with the bolt.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

      NOTE:

      Do not allow the anchor part of the rear seat inner with center belt assembly RH to overlap the protruding parts of the vehicle body.

      GTY774521Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protruding Part
    2. Engage the clamp.
    3. Connect the connector.
  2. INSTALL REAR SEAT INNER BELT ASSEMBLY RH (for TMMK Made) 
    1. When installing a new rear seat inner belt assembly RH:
      1. Install the rear seat inner belt assembly RH with the bolt.
        GTY774521Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        Protruding Part
        NOTE:
        • Install the rear seat inner belt assembly RH with the arrow on the anchor part facing the front of the vehicle.
        • Do not allow the anchor part of the rear seat inner belt assembly RH to overlap the protruding parts of the floor panel.

        Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

      2. Engage the clamp.
      3. Connect the connector to install the rear seat inner belt assembly RH.
      4. Install the rear center seat outer belt assembly.

        Refer to INSTALLATION [06/2017 - 09/2019] 

    2. When reusing the rear seat inner belt assembly RH:
      1. Engage the clamp.
      2. Connect the connector to install the rear seat inner belt assembly RH.
  3. INSTALL LUGGAGE COMPARTMENT TRIM INNER PAD (for Fold Down Seat Type) 

    Refer to PROCEDURE - Step 11

  4. INSTALL REAR SEATBACK ASSEMBLY LH (for Fold Down Seat Type) 

    Refer to PROCEDURE - Step 5

  5. INSTALL REAR SEATBACK ASSEMBLY RH (for Fold Down Seat Type) 

    Refer to PROCEDURE - Step 6

  6. INSTALL REAR SEAT CUSHION LOCK HOOK (for Fold Down Seat Type) 

    Refer to PROCEDURE - Step 7

  7. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type) 

    For TMC Made:

    Refer to PROCEDURE - Step 11

    For TMMK Made:

    Refer to PROCEDURE - Step 8

  8. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for Fold Down Seat Type) 

    For TMC Made:

    Refer to PROCEDURE - Step 12

  9. INSTALL REAR SEAT ASSEMBLY (for Fixed Seat Type) 

    Refer to INSTALLATION [06/2017 - ]

  10. INSTALL SPARE WHEEL COVER ASSEMBLY 

    Refer to PROCEDURE - Step 10

scientia non olet · About LEMON Manuals