DTC B1650: Occupant Classification System Malfunction; DTC B165A: Occupant Detection Sensor Zero Point Calibration Incomplete [03/2017 - ]: Procedure

1. Check for occupant classification system DTCs.

   Refer to DTC CHECK / CLEAR [03/2017 - ]

   OK

   DTCs are not output.

   Result

   Proceed to
   OK
   NG

Result: 

NG 

GO TO OCCUPANT CLASSIFICATION SYSTEM. Refer to  DIAGNOSTIC TROUBLE CODE CHART [03/2017 - 06/2017]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [06/2017 - 09/2019]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [09/2019 - ] 

Result: 

OK 

See step  2

1. Turn the ignition switch to ON, and wait for at least 60 seconds.
2. Clear the DTCs stored in memory.

   Body Electrical > SRS Airbag > Clear DTCs 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

END