LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry LE, FWD >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance - Service Information (Except Hybrid) >> FRONT DISC BRAKE PAD (Except 2-Pot Caliper) >> Removal [03/2017 - ] >> Procedure

Removal [03/2017 - ]: Procedure

  1. REMOVE FRONT WHEEL 

    See step  1 [03/2017 - 06/2017], or see step  1 [06/2017 - ]

  2. REMOVE FRONT DISC BRAKE PAD 
    WARNING:
    • Be careful not to get pinched by the front disc brake cylinder assembly or other parts when removing the front disc brake pads.
    • After lifting up the front disc brake cylinder assembly, secure it in place before performing any work on it.
      GTY773838Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    • The front disc brake cylinder assembly could fall, pinching hands or fingers and causing injury.
    1. Hold the front disc brake cylinder slide pin (lower side) and remove the bolt.
      GTY741395Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Turn
      *b Hold
      NOTE:

      Do not kink or damage the brake line.

    2. Pull the front disc brake cylinder assembly upward.
    3. Remove the 2 front disc brake pads from the front disc brake cylinder mounting.
      GTY754732Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE FRONT DISC BRAKE ANTI-SQUEAL SHIM KIT 
    1. Remove the front No. 1 disc brake anti-squeal shim and front No. 2 disc brake anti-squeal shim from each front disc brake pad.
    2. Using a screwdriver, remove the front disc brake pad wear indicator plate from each front disc brake pad.
      GTY754746Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals