Installation [06/2017 - ]: Procedure

INSTALL BATTERY

Install the battery to the vehicle.

Install the No. 2 battery clamp to the battery clamp sub-assembly with the bolt.

GTY753702

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Torque: 18.5 N*m (189 kgf*cm, 14 ft.*lbf)

Connect the cable to the positive (+) battery terminal and tighten the nut.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
Engage the 2 claws to install the battery terminal cap to the positive (+) battery terminal.

CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
1. Connect the cable to the negative (-) battery terminal and tighten the nut.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
  
  NOTE:
  When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
  
  Refer to INITIALIZATION [06/2017 - 08/2018] , or refer to INITIALIZATION [08/2018 - 09/2019] , or refer to INITIALIZATION [09/2019 - 03/2020] , or refer to INITIALIZATION [03/2020 - 10/2020] , or refer to INITIALIZATION [10/2020 - 08/2022] , or refer to INITIALIZATION [08/2022 - ]