LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry LE, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 36 (Automatic Transmission System (UB80F) - Service Information (1 Of 2) (Except Hybrid)) >> Shift Lever >> Reassembly [03/2020 - ] >> Procedure

Reassembly [03/2020 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL LOWER POSITION INDICATOR HOUSING 
    1. Engage the 4 claws and 2 guides to install the lower position indicator housing to the shift lock control unit assembly.
      GTY762206Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Do not damage the lower position indicator housing.

  2. INSTALL SHIFT POSITION INDICATOR 
    1. Engage the 2 claws to install the shift position indicator to the rear upper console panel sub-assembly.
      GTY762205Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the 2 screws.
      GTY762204Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Engage the 2 clamps to connect the wire harness.
      GTY773307Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals