LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry LE, FWD >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System (A25A-FKS) - Service Information (Except Hybrid) >> Oil Pump >> Installation [03/2017 - ] >> Procedure

Installation [03/2017 - ]: Procedure

  1. INSTALL ENGINE BALANCER ASSEMBLY 

    Refer to PROCEDURE - Step 6 [03/2017 - 09/2019] , or refer to PROCEDURE - Step 6 [09/2019 - 03/2020] , or refer to PROCEDURE - Step 6 [03/2020 - 10/2020] , or refer to PROCEDURE - Step 6 [10/2020 - ]

  2. INSTALL STIFFENING CRANKCASE ASSEMBLY 

    Refer to PROCEDURE - Step 7 [03/2017 - 09/2019] , or refer to PROCEDURE - Step 7 [09/2019 - 03/2020] , or refer to PROCEDURE - Step 7 [03/2020 - 10/2020] , or refer to PROCEDURE - Step 7 [10/2020 - ]

  3. INSTALL OIL PUMP ASSEMBLY 
    1. Install the oil pump assembly to the stiffening crankcase assembly with the 3 bolts.

      Torque: 24 N*m (245 kgf*cm, 18 ft.*lbf) 

  4. INSTALL OIL PUMP BRACKET 

    Refer to PROCEDURE - Step 9 [03/2017 - 09/2019] , or refer to PROCEDURE - Step 9 [09/2019 - 03/2020] , or refer to PROCEDURE - Step 9 [03/2020 - 10/2020] , or refer to PROCEDURE - Step 9 [10/2020 - ]

  5. INSTALL ENGINE OIL LEVEL SENSOR 

    See step  1

  6. INSTALL OIL STRAINER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 11 [03/2017 - 09/2019] , or refer to PROCEDURE - Step 11 [09/2019 - 03/2020] , or refer to PROCEDURE - Step 11 [03/2020 - 10/2020] , or refer to PROCEDURE - Step 11 [10/2020 - ]

  7. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 12 [03/2017 - 09/2019] , or refer to PROCEDURE - Step 12 [09/2019 - 03/2020] , or refer to PROCEDURE - Step 12 [03/2020 - 10/2020] , or refer to PROCEDURE - Step 12 [10/2020 - ]

  8. INSTALL TIMING CHAIN COVER ASSEMBLY 

    Refer to INSTALLATION [03/2017 - 10/2020] , or refer to INSTALLATION [10/2020 - ]

scientia non olet · About LEMON Manuals