Removal [03/2017 - ]: Procedure

Refer to PROCEDURE - Step 13 [03/2017 - 06/2017] , or refer to PROCEDURE - Step 13 [06/2017 - 08/2018] , or refer to PROCEDURE - Step 13 [08/2018 - 09/2019] , or refer to PROCEDURE - Step 13 [09/2019 - 03/2020] , or refer to PROCEDURE - Step 13 [03/2020 - 10/2020] , or refer to PROCEDURE - Step 13 [10/2020 - 08/2022] , or refer to PROCEDURE - Step 13 [08/2022 - ]

1. Disconnect the oil pressure control valve assembly connector.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Using an 8 mm socket wrench, remove the bolt and oil pressure control valve assembly from the timing chain cover assembly.