Caution / Notice / Hint

NOTE:

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
Before starting the following inspection, inspect the speedometer and check that the tire size and air pressure are as specified.
Tire size and air pressure: Refer to INSPECTION [06/2017 - 09/2019] , or refer to INSPECTION [09/2019 - 03/2020] , or refer to INSPECTION [03/2020 - ]

Speedometer: Refer to ON-VEHICLE INSPECTION [06/2017 - 10/2020]