DTC B1500-13: Fuel Sender Circuit Open; DTC B1501-13: Sub Fuel Sender Circuit Open [03/2020 - ]: Description
- FOR 2WD
The fuel sender gauge assembly is connected to the combination meter assembly via direct line. If there is an open or short in the direct line, the combination meter assembly stores DTC B1500-13.
- FOR AWD
The fuel sender gauge assembly and No. 2 fuel sender gauge assembly are connected to the combination meter assembly via direct line. If there is an open or short in the direct line, the combination meter assembly stores DTC B1500-13 or B1501-13.
DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note B1500-13 Fuel Sender Circuit Open Diagnosis Condition: - The ignition switch is ON
- IG power source voltage is 9.5 V or more
Malfunction Status:
- Voltage signal from fuel sender gauge assembly is 0.2 V or less
- Voltage signal from fuel sender gauge assembly is 4.7 V or more
Malfunction Time:
- 10 seconds or more
- Harness or connector
- Fuel sender gauge assembly
- Fuel suction tube with pump and gauge assembly
- Combination meter assembly
DTC stored - B1501-13 Sub Fuel Sender Circuit Open Diagnosis Condition: - The ignition switch is ON
- IG power source voltage is 9.5 V or more
Malfunction Status:
- Voltage signal from No. 2 fuel sender gauge assembly is 0.2 V or less
- Voltage signal from No. 2 fuel sender gauge assembly is 4.7 V or more
Malfunction Time:
- 10 seconds or more
- Harness or connector
- No. 2 fuel sender gauge assembly
- Rear fuel main and return tube sub-assembly
- Combination meter assembly
DTC stored For AWD