LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry LE, FWD >> Repair and Diagnosis >> Electrical >> Gauges >> Meter / Gauge / Display - Service Information (Except Hybrid) >> HEADUP Display >> Installation [06/2017 - ] >> Procedure

Installation [06/2017 - ]: Procedure

  1. INSTALL METER MIRROR SUB-ASSEMBLY 
    1. Install the meter mirror sub-assembly with the 3 screws.
  2. INSTALL DEFROSTER NOZZLE ASSEMBLY 

    Refer to PROCEDURE - Step 20 [06/2017 - 10/2020] , or refer to PROCEDURE - Step 19 [10/2020 - 08/2021] , or refer to PROCEDURE - Step 18 [08/2021 - ]

  3. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT 

    Refer to PROCEDURE - Step 21 [06/2017 - 10/2020] , or refer to PROCEDURE - Step 20 [10/2020 - 08/2021] , or refer to PROCEDURE - Step 19 [08/2021 - ]

  4. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT 

    Refer to PROCEDURE - Step 22 [06/2017 - 10/2020] , or refer to PROCEDURE - Step 21 [10/2020 - 08/2021] , or refer to PROCEDURE - Step 20 [08/2021 - ]

  5. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to INSTALLATION [06/2017 - 10/2020] , or refer to INSTALLATION [10/2020 - ]

scientia non olet · About LEMON Manuals