Installation [09/2019 - 03/2020]: Procedure

1. Install the console box assembly with the 4 bolts and 2 screws.

1. Install the console box carpet as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Install in this Direction

1. Engage the 2 claws.
2. Install the instrument panel cup holder with the 3 screws.

1. Install the front console box insert sub-assembly with the 5 screws.

for UB80E:

Refer to PROCEDURE - Step 2

for UA80E:

Refer to PROCEDURE - Step 2

1. Connect each connector.
2. Engage the clamp.
3. Engage the 6 clips and 7 claws to install the rear upper console panel sub-assembly as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Install in this Direction

4. Move the shift lever to P.

for UB80E:

Refer to PROCEDURE - Step 1

for UA80E:

Refer to PROCEDURE - Step 1

for UB80E:

Refer to PROCEDURE - Step 5

for UA80E:

Refer to PROCEDURE - Step 5

1. Connect each connector.
2. Engage the clamp.
3. Engage the 7 clips to install the lower center instrument panel finish panel as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Install in this Direction

1. Engage the 2 guides, claw and clip to install the instrument panel finish plate garnish as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Install in this Direction

1. Engage the 11 clips to install the No. 2 instrument panel garnish sub-assembly as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Install in this Direction

1. Connect the connector.
2. Engage the 3 guides and 7 clips to install the No. 1 meter hood cluster as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Install in this Direction