Caution / Notice / Hint
NOTE:
- When replacing the skid control ECU (brake actuator assembly), perform system variant learning and acceleration sensor zero point calibration.
Refer to CALIBRATION [06/2017 - 10/2020]
- Inspect the fuses for circuits related to this system before performing the following procedure.
HINT:
When C1241 and/or C1417 is output together with C146C, inspect and repair the trouble areas indicated by C1241 and/or C1417 first.
for C1241: Refer to DTC C1241: Low Power Supply Voltage Malfunction [06/2017 - 10/2020]
for C1417: Refer to DTC C1417: High Power Supply Voltage Malfunction [06/2017 - 10/2020]