LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry LE, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Hydraulic) - Service Information (Except Hybrid) >> Brake Booster >> Reassembly [03/2017 - ] >> Procedure

Reassembly [03/2017 - ]: Procedure

  1. INSTALL VACUUM WARNING SWITCH ASSEMBLY 
    1. Install a new check valve grommet to the brake booster assembly.
    2. Install the vacuum warning switch assembly to the brake booster assembly as shown in the illustration.
      GTY750947Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a 30° +/- 20°
      Up
  2. INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY 
    1. Install a new check valve grommet to the brake booster assembly.
    2. Install the brake vacuum check valve assembly to the brake booster assembly.
scientia non olet · About LEMON Manuals