DTC C1380-7F: Stop Lamp Relay Actuator Stuck Off [10/2020 - ]: Description
Refer to DTC C1380-7E.
Refer to DESCRIPTION [10/2020 - 08/2021] , or refer to DESCRIPTION [08/2021 - ]
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1380-7F | Stop Lamp Relay Actuator Stuck Off | When the voltage at the +BS terminal is between 10 V or more and the stop light control relay (stop light switch assembly) drive output (STPO) is on, a signal is not input to the STP2 terminal for 5 seconds or more. |
|