Remote Control System does not Operate [06/2017 - ]: Procedure
- CHECK REMOTE CONTROL FUNCTION
- Check the key-linked and wireless transmitter-linked functions.
Refer to OPERATION CHECK [03/2017 - ]
Result
Result Proceed to Both the power windows and sliding roof operate by the key-linked and wireless transmitter-linked functions. A The sliding roof does not operate by the key-linked or wireless transmitter-linked function, but all of the power windows operate. B Both the power windows and roof glass do not operate by the key-linked or wireless transmitter-linked function. C
Result:
A
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2017 - 08/2018] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2018 - 09/2019] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2019 - 03/2020] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [03/2020 - 10/2020] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2020 - 08/2021] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2021 - ]
Result:
C
GO TO POWER WINDOW CONTROL SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [03/2017 - ]
Result:
B
See step 2
- Check the key-linked and wireless transmitter-linked functions.
- CHECK SLIDING ROOF OPERATION
- Check the sliding roof operation.
Refer to OPERATION CHECK [03/2017 - ]
OK
Sliding roof operates normally.
Result
Proceed to OK NG
Result:
NG
GO TO OTHER PROBLEM (Panoramic Moon Roof System does not Operate). Refer to Panoramic Moon Roof System does not Operate [06/2017 - ]
Result:
OK
See step 3
- Check the sliding roof operation.
- REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)
- Replace the sliding roof ECU (sliding roof drive gear assembly).
Refer to REMOVAL [06/2017 - 10/2020] , or refer to REMOVAL [10/2020 - ]
Result
Proceed to NEXT
Result:
NEXT
See step 4
- Replace the sliding roof ECU (sliding roof drive gear assembly).
- INITIALIZE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)
- Initialize the sliding roof ECU (sliding roof drive gear assembly).
Refer to INITIALIZATION [03/2017 - ]
Result
Proceed to NEXT
Result:
NEXT
See step 5
- Initialize the sliding roof ECU (sliding roof drive gear assembly).
- CHECK REMOTE CONTROL FUNCTION
- Check the key-linked and wireless transmitter-linked functions.
Refer to OPERATION CHECK [03/2017 - ]
OK
The key-linked and wireless transmitter-linked functions operate normally.
Result
Proceed to OK NG
Result:
OK
END (SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) WAS DEFECTIVE)
Result:
NG
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU). Refer to REMOVAL [06/2017 - 10/2020] , or refer to REMOVAL [10/2020 - ]
- Check the key-linked and wireless transmitter-linked functions.