Caution / Notice / Hint

NOTE:

The sliding roof key-linked function and sliding roof wireless transmitter-linked function are operative when the power window customize settings "Door Key P/W Up", "Door Key P/W Down" and "P/W Down W/Transmit" are set to "ON" using the Techstream. (The default setting of each is "OFF".)
If the sliding roof ECU (sliding roof drive gear assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear assembly) must be initialized.
Refer to INITIALIZATION [03/2017 - ]
The sliding roof system uses the CAN and LIN communication systems. First, confirm that there are no malfunctions in the CAN and LIN communication systems. Refer to How to Proceed with Troubleshooting.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [03/2017 - ]
If a sliding roof ECU (sliding roof drive gear assembly) DTC is output, perform troubleshooting for the DTC first.
Refer to DTC CHECK / CLEAR [03/2017 - ]
Before replacing the main body ECU (multiplex network body ECU), refer to Registration.
Refer to REGISTRATION [03/2017 - 09/2019] , or refer to REGISTRATION [09/2019 - 08/2022] , or refer to REGISTRATION [08/2022 - ]