Reassembly [10/2020 - ]: Procedure
- INSTALL NO. 2 CONSOLE BOX DUCT (w/ Register)
- INSTALL NO. 3 CONSOLE BOX DUCT (w/ Register)
- INSTALL NO. 1 BOX SIDE PANEL
- INSTALL NO. 2 BOX SIDE PANEL
- INSTALL CONSOLE BOX RETAINER
- INSTALL USB CHARGER SOCKET
Refer to PROCEDURE - Step 1
- INSTALL CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY
- INSTALL CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY
- INSTALL CONSOLE COMPARTMENT DOOR CUSHION
- INSTALL CONSOLE COMPARTMENT DOOR PANEL
- INSTALL REAR CONSOLE ARMREST ASSEMBLY
- Insert the rear console armrest assembly as shown in the illustration.
Install in this Direction - Engage the guide to install the console box mount bracket spring and console box spacer as shown in the illustration.
Install in this Direction - Install the console compartment door stopper pin as shown in the illustration.
Install in this Direction - Install the E-ring.
- Engage the 2 guides to install the rear console armrest assembly.
- Insert the rear console armrest assembly as shown in the illustration.
- INSTALL CONSOLE BOX REGISTER ASSEMBLY (w/ Register)
- INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY