LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry LE, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Panels / Trim - Service Information (1 Of 2) (Except Hybrid) >> Front Console Box >> Reassembly [06/2017 - 09/2019] >> Procedure

Reassembly [06/2017 - 09/2019]: Procedure

  1. INSTALL NO. 2 CONSOLE BOX DUCT (for TMMK Made) 
    1. w/ Register:
      1. Engage the guide as shown in the illustration.
        GTY753799Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        Install in this Direction
      2. Engage the 2 claws to install the No. 2 console box duct.
        GTY750328Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 3 CONSOLE BOX DUCT (for TMMK Made) 
    1. w/ Register:
      1. Engage the guide as shown in the illustration.
        GTY748410Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        Install in this Direction
      2. Engage the 2 claws to install the No. 3 console box duct.
        GTY751343Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL NO. 1 BOX SIDE PANEL (for TMMK Made) 
    1. Engage the 4 claws as shown in the illustration.
      GTY746557Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    2. Engage the 3 claws to install the No. 1 box side panel as shown in the illustration.
      GTY765089Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
  4. INSTALL NO. 2 BOX SIDE PANEL (for TMMK Made) 
    1. Engage the 5 claws as shown in the illustration.
      GTY761362Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    2. Engage the 3 claws to install the No. 2 box side panel as shown in the illustration.
      GTY771065Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
  5. INSTALL CONSOLE BOX RETAINER (for TMMK Made) 
    1. Engage the 2 claws to install the console box retainer.
      GTY751781Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSTALL USB CHARGER SOCKET (w/ Power Outlet Socket) 

    Refer to PROCEDURE - Step 1

  7. INSTALL CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY (for TMMK Made) 
    1. Install the console compartment door hinge sub-assembly with the 6 screws.
      GTY751782Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. INSTALL CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY (for TMMK Made) 
    1. Install the console compartment door lock sub-assembly with the 3 screws.
      GTY770994Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. INSTALL CONSOLE COMPARTMENT DOOR CUSHION (for TMMK Made) 
    1. Engage the 2 claws to install the 2 console compartment door cushions.
      GTY751777Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. INSTALL CONSOLE COMPARTMENT DOOR PANEL (for TMMK Made) 
    1. Engage the 13 claws to install the console compartment door panel as shown in the illustration.
      GTY744854Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
  11. INSTALL CONSOLE COMPARTMENT DOOR CUSHION (for TMC Made) 
    1. Engage the 2 clips to install 2 new console compartment door cushions as shown in the illustration.
      GTY756383Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
  12. INSTALL REAR CONSOLE ARMREST ASSEMBLY 
    1. Insert the rear console armrest assembly as shown in the illustration.
      GTY741010Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    2. Engage the guide to install the console box mount bracket spring and console box spacer as shown in the illustration.
      GTY746715Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    3. Install the console compartment door stopper pin as shown in the illustration.
      GTY743938Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    4. Install the E-ring.
      GTY753381Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Engage the 2 guides to install the rear console armrest assembly.
      GTY746799Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. INSTALL CONSOLE BOX REGISTER ASSEMBLY (for TMMK Made) 
    1. w/ Register:
      1. Engage the 6 claws to install the console box register assembly as shown in the illustration.
        GTY740873Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        Install in this Direction
  14. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY (for TMMK Made) 
    1. Engage the 6 claws and 4 clips to install the console rear end panel sub-assembly as shown in the illustration.
      GTY759038Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
scientia non olet · About LEMON Manuals