LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry LE, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door / Hatch - Service Information (2 Of 2) (Except Hybrid) >> Luggage Compartment Door Opener Inner Switch >> Inspection [03/2017 - ] >> Procedure

Inspection [03/2017 - ]: Procedure

  1. INSPECT LUGGAGE COMPARTMENT DOOR OPENING SWITCH ASSEMBLY 
    1. Check the switch.
      GTY764755Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Luggage Compartment Door Opening Switch Assembly)
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection Condition Specified Condition
        2 - 5 Pressed (ON) Below 25 Ω
        2 - 5 Not pressed (OFF) 1 MΩ or higher

        If the result is not as specified, replace the luggage compartment door opening switch assembly.

    2. Check the switch illumination.
      1. Apply battery voltage to the switch connector and check that the luggage compartment door opening switch assembly illuminates.

        OK

        Battery Connection Specified Condition
        Battery positive (+) → Terminal 6
        Battery negative (-) → Terminal 1        		 Illumination illuminates

        If the result is not as specified, replace the luggage compartment door opening switch assembly.

scientia non olet · About LEMON Manuals