LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry LE, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door / Hatch - Service Information (1 Of 2) (Except Hybrid) >> Hood >> Disassembly [03/2017 - 10/2020] >> Procedure

Disassembly [03/2017 - 10/2020]: Procedure

  1. REMOVE HOOD TO RADIATOR SUPPORT SEAL 
    1. Using a clip remover, disengage the 10 hood to radiator support seal clips to remove the hood to radiator support seal.
      GTY746968Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 10 hood to radiator support seal clips from the hood to radiator support seal.
  2. REMOVE HOOD INSULATOR 
    1. Using a clip remover, remove the 9 hood insulator clips.
      GTY746965Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 guides to remove the hood insulator.
  3. REMOVE WASHER NOZZLE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

  4. DISCONNECT WASHER HOSE ASSEMBLY 
    1. Disengage the 5 clamps.
      GTY746966Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the grommet and disconnect the washer hose assembly.
  5. REMOVE HOOD SUPPORT ASSEMBLY LH 

    See step  2

  6. REMOVE HOOD STAY BRACKET LH 

    See step  3

  7. REMOVE HOOD SUPPORT ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

  8. REMOVE HOOD STAY BRACKET RH 

    HINT: 

    Use the same procedure as for the LH side.

scientia non olet · About LEMON Manuals