LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry LE, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door / Hatch - Service Information (1 Of 2) (Except Hybrid) >> Hood Support >> Disposal [03/2017 - 10/2020] >> Procedure

Disposal [03/2017 - 10/2020]: Procedure

  1. DISPOSE OF HOOD SUPPORT ASSEMBLY 
    1. Secure the hood support assembly horizontally in a vise with the piston rod pulled out.
    2. Wearing safety glasses, gradually cut a part within the area (a) shown in the illustration using a metal saw to release the gas.
      GTY770529Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      SPECIFICATION:

      Area Measurement
      a 50 mm (1.97 in.)
      WARNING:

      Although the gas inside the hood support assembly is colorless, odorless and harmless, metal debris may scatter. Therefore, cover hood support assembly with a piece of cloth or other material.

scientia non olet · About LEMON Manuals