LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> Camry LE, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Service Information (Except Hybrid) >> Trip Switch >> Removal [03/2017 - ] >> Procedure

Removal [03/2017 - ]: Procedure

  1. REMOVE NO. 1 METER HOOD CLUSTER 

    Refer to PROCEDURE - Step 1 [03/2017 - 06/2017] , or refer to PROCEDURE - Step 1 [06/2017 - 09/2019] , or refer to PROCEDURE - Step 1 [09/2019 - 03/2020] , or refer to PROCEDURE - Step 1 [03/2020 - ]

  2. REMOVE NO. 2 METER HOOD CLUSTER 

    Refer to PROCEDURE - Step 16 [03/2017 - 06/2017] , or refer to PROCEDURE - Step 16 [06/2017 - 10/2020] , or refer to PROCEDURE - Step 16 [10/2020 - ]

  3. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    See step  5 [03/2017 - 06/2017], or see step  5 [06/2017 - 10/2020], or see step  5 [10/2020 - ]

  4. REMOVE TRIP SWITCH 
    1. Disengage the claw, clip and guide to remove the trip switch as shown in the illustration.
      GTY768766Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction