Customize Parameters [03/2017 - 08/2018]

CUSTOMIZE CLOCK SYSTEM

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

HINT:

The following items can be customized.

Customizing with the multi-display

Turn the ignition switch to ON.
Enter the following menus: MENU / Setup / Clock.

Select the setting by referring to the table below.

Display	Default	Description	Setting	Relevant ECU
Time Zone	*	Setting for clock time zone	*	Radio and display receiver assembly
Daylight Saving Time	On	Setting for clock daylight saving time	On, Off or Auto	Radio and display receiver assembly
Auto Adjust by GPS	On	Setting for clock auto adjust by GPS	On or Off	Radio and display receiver assembly
24-Hour Time Format	Off	Setting for clock 24-hour time format	On or Off	Radio and display receiver assembly
Hours	-	Manual adjustment of clock hour	-, +, AM or PM	Radio and display receiver assembly
Minutes	-	Manual adjustment of clock minute	-, + or: 00	Radio and display receiver assembly

*: Changes according to the vehicle specification

HINT:

Depending on the specifications of the vehicle, some items may not be displayed.