Skid Control ECU Communication Stop Mode [10/2020 - ]: Description

Detection Item	Symptom	Trouble Area
Skid Control ECU Communication Stop Mode	Any of the following conditions are met: Communication stop for "Skid Control (ABS/VSC/TRAC)" is indicated on the "Communication Bus Check" screen of the Techstream. Refer to PROBLEM SYMPTOMS TABLE [10/2020 - ] Communication stop history for "Skid Control (ABS/VSC/TRAC)" is indicated on the "Communication Bus Check (Detail)" screen of the Techstream. (The Lost Communication Time value for "Skid Control (ABS/VSC/TRAC)" is 6 or more.) Refer to PROBLEM SYMPTOMS TABLE [10/2020 - ] Communication system DTCs (DTCs that start with U) that correspond to "Skid Control ECU Communication Stop Mode" in "DTC Combination Table" are output. Refer to DTC COMBINATION TABLE [10/2020 - 08/2021] , or refer to DTC COMBINATION TABLE [08/2021 - ]	Brake actuator assembly branch line or connector Power source circuit of brake actuator assembly Brake actuator assembly ground circuit Brake actuator assembly