DTC B1620/21: Side Airbag Sensor RH Circuit Malfunction [02/2017 - 09/2019]: Description
The side collision sensor RH circuit (bus 1) consists of the airbag sensor assembly, door side airbag sensor RH, No. 1 side airbag sensor RH and No. 2 side airbag sensor RH.
The door side airbag sensor RH, No. 1 side airbag sensor RH and No. 2 side airbag sensor RH detect impacts to the vehicle and send signals to the airbag sensor assembly to determine if the airbags and pretensioners should be deployed.
DTC B1620/21 is stored when a malfunction is detected in the No. 1 side airbag sensor RH.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Test Mode / Check Mode |
|---|---|---|---|---|
| B1620/21 | Side Airbag Sensor RH Circuit Malfunction | Any of the following conditions is met:
|
|
Does not apply to test/check mode |
DTC DETECTION CONDITIONS:
| Vehicle Condition | |||
|---|---|---|---|
| Pattern 1 | Pattern 2 | ||
| Diagnosis Condition | Ignition switch ON | ◦ | ◦ |
| Malfunction Status | No. 1 side airbag sensor RH malfunction | ◦ | - |
| Airbag sensor assembly malfunction | - | ◦ | |
| Detection Time | - | - | |
| Number of Trips | 1 trip | 1 trip | |
HINT:
DTC will be output when conditions for either of the patterns in the table above are met.