On-Vehicle Inspection [10/2017 - 12/2021]: Procedure

HINT: 

Perform Inspection After Repair after repairing vacuum leaks in the intake system.

• w/ Canister Pump Module:

  Refer to INITIALIZATION [02/2017 - ]

• w/o Canister Pump Module:

  Refer to INITIALIZATION [10/2017 - 12/2021]

1. Check that there are no vacuum leaks at the points shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Perform "Inspection After Repair" after repairing vacuum leaks in the intake system.
   • w/ Canister Pump Module:

     Refer to INITIALIZATION [02/2017 - ]

   • w/o Canister Pump Module:

     Refer to INITIALIZATION [10/2017 - 12/2021]