LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> C-HR XLE >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System - Service Information >> Thermostat >> Removal [02/2017 - ] >> Procedure

Removal [02/2017 - ]: Procedure

  1. REMOVE NO. 1 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 7 [02/2017 - 10/2017] , or refer to PROCEDURE - Step 7 [10/2017 - 08/2020] , or refer to PROCEDURE - Step 7 [08/2020 - 12/2021] , or refer to PROCEDURE - Step 7 [12/2021 - ]

  2. DRAIN ENGINE COOLANT 

    Refer to PROCEDURE - Step 2

  3. SEPARATE WATER INLET 
    1. Remove the 2 nuts and separate the water inlet.
      GTY742321Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE THERMOSTAT 
    1. Remove the thermostat from the water inlet housing.
      GTY742322Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the gasket from the thermostat.
scientia non olet · About LEMON Manuals