LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> C-HR XLE >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Hydraulic) - Service Information >> Vacuum Pump >> Removal [08/2020 - ] >> Procedure

Removal [08/2020 - ]: Procedure

  1. REMOVE BATTERY 

    Refer to REMOVAL [08/2020 - ]

  2. REMOVE NO. 2 CYLINDER HEAD COVER 

    Refer to PROCEDURE - Step 1

  3. DISCONNECT ENGINE WIRE 

    Refer to REMOVAL [08/2020 - 12/2021] , or refer to REMOVAL [12/2021 - ]

  4. REMOVE VACUUM PUMP ASSEMBLY 
    1. Slide the clip and disconnect the union to connector tube hose from the vacuum pump assembly.
      GTY750630Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 3 bolts and vacuum pump assembly from the engine assembly.
    3. Remove the No. 2 O-ring and No. 3 O-ring from the vacuum pump assembly.
      GTY484925Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 No. 2 O-ring
      *2 No. 3 O-ring
scientia non olet · About LEMON Manuals