Caution / Notice / Hint
NOTE:
Make sure to release vacuum from the brake booster assembly before removing the master cylinder sub-assembly from the brake booster assembly.
HINT:
When the cable is disconnected / reconnected to the battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used.
- Learning completes when vehicle is driven
Effect/Inoperative Function When Necessary Procedures are not Performed Necessary Procedures Link Lane tracing assist system Drive the vehicle straight ahead at 35 km/h (22 mph) or more for 5 second or more. Refer to INITIALIZATION [08/2020 - ] Pre-collision system - Learning completes when vehicle is operated normally
Effect/Inoperative Function When Necessary Procedures are not Performed Necessary Procedures Link Power door lock control system - Back door opener
Perform door unlock operation with door control switch or electrical key transmitter sub-assembly switch. Refer to INITIALIZATION [02/2017 - ] Air conditioning system After the ignition switch is turned to ON, the servo motor standard position is recognized. -