LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> C-HR XLE >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Hydraulic) - Service Information >> Brake Booster >> Reassembly [02/2017 - 09/2019] >> Procedure

Reassembly [02/2017 - 09/2019]: Procedure

  1. INSTALL VACUUM WARNING SWITCH ASSEMBLY 
    1. Install a new check valve grommet to the brake booster assembly.
    2. Install the vacuum sensor assembly to the brake booster assembly as shown in the illustration.
      GTY765390Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a 63° +/- 4°
      *b Up
  2. INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY 
    1. Install a new check valve grommet to the brake booster assembly.
    2. Install the brake vacuum check valve assembly to the brake booster assembly as shown in the illustration.
      GTY741480Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a 90° +/- 4°
      *b Up
scientia non olet · About LEMON Manuals