LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> C-HR XLE >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Deterrent System / Keyless Entry System - Service Information >> Engine Hood Courtesy Switch >> Installation [10/2017 - ] >> Procedure

Installation [10/2017 - ]: Procedure

  1. INSTALL ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY) 
    1. Engage the guide to connect the hood lock control cable assembly.
      GTY744670Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the hood courtesy switch (hood lock assembly) with the 2 bolts and hood lock bolt.

      Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

    3. Connect the connector.
  2. INSTALL HOOD LOCK NUT CAP 
    1. Install a new hood lock nut cap.
  3. INSTALL FRONT BUMPER ASSEMBLY 

    Refer to INSTALLATION [10/2017 - 09/2019] , or refer to INSTALLATION [09/2019 - ]

scientia non olet · About LEMON Manuals