LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> C-HR Limited >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension - Service Information >> Rear Lower Arm >> Removal [10/2017 - ] >> Procedure

Removal [10/2017 - ]: Procedure

  1. REMOVE REAR WHEEL 

    Refer to REMOVAL [02/2017 - 05/2018] , or refer to REMOVAL [05/2018 - ]

  2. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH (w/ Height Control Sensor) 

    Refer to REMOVAL [10/2017 - ]

  3. REMOVE REAR STABILIZER LINK ASSEMBLY 

    See step  2 [02/2017 - 09/2019] See step  2 [09/2019 - ]

  4. REMOVE REAR COIL SPRING 

    See step  3

  5. REMOVE REAR LOWER COIL SPRING INSULATOR 

    See step  5

  6. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY 
    1. Remove the nut, No. 2 camber adjust cam, rear suspension toe adjust cam sub-assembly and rear No. 2 suspension arm assembly.
      NOTE:

      Hold the rear suspension toe adjust cam sub-assembly while rotating the nut.

      GTY574491Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY 
    1. Remove the 2 bolts, 2 nuts and rear No. 1 suspension arm assembly from the rear axle carrier sub-assembly and rear suspension member sub-assembly.
      NOTE:

      Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

      GTY609386Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals