Caution / Notice / Hint

WARNING: This page is about a different car, the 2020 Toyota C-HR, 2019 Toyota C-HR, and 2018 Toyota C-HR. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle. As a result, a DTC may be stored.
If the forward recognition camera has been replaced with a new one, be sure to perform forward recognition camera learning.
Refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [02/2017 - 08/2020]
First check the CAN communication system by following How to Proceed with Troubleshooting. After checking that there are no malfunctions in the CAN communication system, proceed with troubleshooting.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [02/2017 - 05/2018] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [05/2018 - 09/2019] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2019 - 08/2020]