DTC C1A50: Brake System Malfunction [02/2017 - 08/2020]: Description
WARNING: This page is about a different car, the 2020 Toyota C-HR, 2019 Toyota C-HR, and 2018 Toyota C-HR. However, it is still accessible from the selected car via links, so may be relevant.
The forward recognition camera receives vehicle stability control system control signals from the skid control ECU (brake actuator assembly). If the forward recognition camera receives a malfunction signal from the vehicle stability control system, DTC C1A50 is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1A50 | Brake System Malfunction | When the vehicle is being driven at a speed of 5 km/h (3 mph) or more 2 seconds after the ignition switch is turned ON, a signal from the skid control ECU (brake actuator assembly) indicating a vehicle stability control system malfunction is detected by the forward recognition camera for 5 seconds or more. |
|