LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> C-HR Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Lighting System - Diagnostics - Introduction) >> Lighting System >> Diagnosis System [02/2017 - 10/2017] >> Diagnosis System [02/2017 - 10/2017]

Diagnosis System [02/2017 - 10/2017]

WARNING: This page is about a different car, the 2019 Toyota C-HR and 2018 Toyota C-HR. However, it is still accessible from the selected car via links, so may be relevant.
  1. DESCRIPTION 
    1. Lighting system data and Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the Techstream to check for malfunctions and perform repairs.
  2. CHECK DLC3 
    1. Check the DLC3.

      Refer to GENERAL INFORMATION [02/2017 - ]

  3. INSPECT BATTERY VOLTAGE 
    1. Measure the battery voltage.

      Standard Voltage

      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery.

scientia non olet · About LEMON Manuals