LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> C-HR Limited >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Panels / Trim - Service Information (2 Of 2) >> Front Bumper >> Disassembly [02/2017 - 10/2017] >> Procedure

Disassembly [02/2017 - 10/2017]: Procedure

  1. REMOVE RADIATOR GRILLE 

    See step  2

  2. REMOVE FRONT BUMPER EXTENSION LH 
    1. Disengage the claws and guide to remove the front bumper extension LH.
      GTY763717Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE FRONT BUMPER EXTENSION RH 

    HINT: 

    Use the same procedure as for the LH side.

  4. REMOVE FOG LIGHT COVER LH 
    1. Remove the 3 screws and fog light cover LH.
      GTY763714Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE FOG LIGHT COVER RH 

    HINT: 

    Use the same procedure as for the LH side.

  6. REMOVE FRONT BUMPER SIDE MOUNTING BRACKET LH 
    1. Remove the screw.
      GTY763715Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the clip.
    3. Disengage the claws to remove the front bumper side mounting bracket LH.
      GTY763712Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE FRONT BUMPER SIDE MOUNTING BRACKET RH 

    HINT: 

    Use the same procedure as for the LH side.

  8. REMOVE FRONT FENDER LINER RETAINER 
    1. Disengage the claws to remove the front fender liner retainer.
      GTY763713Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      Use the same procedure for the opposite side.

  9. REMOVE FRONT BUMPER HOLE COVER 
    1. Disengage the claws and hook to remove the front bumper hole cover.
      GTY763705Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET 
    1. Remove the 2 screws and front bumper extension mounting bracket.
      GTY773639Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE INNER RADIATOR GRILLE 
    1. GTY763704Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Disengage the claws to remove the inner radiator grille.

  12. REMOVE FRONT BUMPER LOWER COVER 
    1. Remove the 2 clips and 6 outside moulding retainers.
      GTY763702Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the claws and guides to remove the front bumper lower cover.
      GTY763703Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 8 grommets.
      GTY763708Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. REMOVE NO. 1 RADIATOR GRILLE MOULDING (except USA and Canada) 
    1. Disengage the claws to remove the No. 1 radiator grille moulding.
      GTY762138Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      Use the same procedure for the opposite side.

  14. REMOVE FRONT BUMPER SIDE RETAINER LH 
    1. Remove the bolt.
      GTY763724Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the claw to remove the front bumper side retainer LH as shown in the illustration.
      GTY773246Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  15. REMOVE FRONT BUMPER SIDE RETAINER RH 

    HINT: 

    Use the same procedure as for the LH side.

  16. REMOVE NO. 1 RADIATOR GRILLE RETAINER 
    1. Disengage the claws to remove the No. 1 radiator grille retainer as shown in the illustration.
      GTY765764Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  17. REMOVE NO. 1 RADIATOR TO SUPPORT SEAL 
    1. Disengage the wire harness clamp.
      GTY763707Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 clips.
    3. Remove the No. 1 radiator to support seal as shown in the illustration.
      GTY767325Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  18. REMOVE FRONT BUMPER ENERGY ABSORBER 
    1. Disengage the guides to remove the front bumper energy absorber as shown in the illustration.
      GTY741265Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  19. REMOVE FRONT ENERGY ABSORBER MOUNTING REINFORCEMENT 
    1. Disengage the claws to remove the front energy absorber mounting reinforcement.
      GTY763721Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  20. REMOVE LOWER FRONT BUMPER ABSORBER 
    1. Disengage the guides to remove the lower front bumper energy absorber as shown in the illustration.
      GTY770397Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  21. REMOVE FRONT BUMPER REINFORCEMENT 
    1. Disengage the wire harness clamps.
      GTY763719Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 6 bolts.
      GTY763720Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the guides to remove the front bumper reinforcement.
  22. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH 
    1. Remove the 4 bolts.
      GTY773642Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the guides to remove the front side member bracket sub-assembly LH.
  23. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

  24. REMOVE NO. 2 FRONT BUMPER REINFORCEMENT 
    1. Remove the 2 nuts and No. 2 front bumper reinforcement.
      GTY763718Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  25. REMOVE FRONT BUMPER BRACKET LH 
    1. Remove the 4 bolts and front bumper bracket LH.
      GTY763725Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  26. REMOVE FRONT BUMPER BRACKET RH 

    HINT: 

    Use the same procedure as for the LH side.

  27. REMOVE NO. 1 RADIATOR AIR GUIDE LH 
    1. Disengage the claw and guide to remove the No. 1 radiator air guide LH as shown in the illustration.
      GTY760746Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction (1)
      Remove in this Direction (2)
  28. REMOVE NO. 1 RADIATOR AIR GUIDE RH 
    1. Disengage the claw and guide to remove the No. 1 radiator air guide RH as shown in the illustration.
      GTY762090Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction (1)
      Remove in this Direction (2)
scientia non olet · About LEMON Manuals