DTC B1660: P Seat Airbag Active Mode Indicator [09/2019 - ]: Description
The passenger airbag ON/OFF indicator circuit consists of the airbag sensor assembly and passenger airbag ON/OFF indicator (clock assembly).
The passenger airbag ON/OFF indicator indicates the operation condition of the instrument panel passenger without door airbag assembly.
DTC B1660 is stored when a malfunction is detected in the passenger airbag ON/OFF indicator circuit.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Test Mode / Check Mode |
|---|---|---|---|---|
| B1660 | P Seat Airbag Active Mode Indicator | Any of the following conditions is met:
|
|
Does not apply to test/check mode |
DTC DETECTION CONDITIONS:
| Vehicle Condition | |||||||
|---|---|---|---|---|---|---|---|
| Pattern 1 | Pattern 2 | Pattern 3 | Pattern 4 | Pattern 5 | Pattern 6 | ||
| Diagnosis Condition | Ignition switch ON | ◦ | ◦ | ◦ | ◦ | ◦ | ◦ |
| Malfunction Status | The airbag sensor assembly detects a line short in the passenger airbag ON/OFF indicator circuit | ◦ | - | - | - | - | - |
| The airbag sensor assembly detects a short to ground in the passenger airbag ON/OFF indicator circuit | - | ◦ | - | - | - | - | |
| The airbag sensor assembly detects a short to B+ in the passenger airbag ON/OFF indicator circuit | - | - | ◦ | - | - | - | |
| The airbag sensor assembly detects an open in the passenger airbag ON/OFF indicator circuit | - | - | - | ◦ | - | - | |
| Passenger airbag ON/OFF indicator malfunction | - | - | - | - | ◦ | - | |
| Airbag sensor assembly malfunction | - | - | - | - | - | ◦ | |
| Detection Time | - | - | - | - | - | - | |
| Number of Trips | 1 trip | 1 trip | 1 trip | 1 trip | 1 trip | 1 trip | |
HINT:
DTC will be output when conditions for either of the patterns in the table above are met.