DTC B162A/2A: Side Airbag Sensor Assembly No. 2 (RH) [02/2017 - 09/2019]: Description
The side collision sensor RH circuit (bus 2) consists of the airbag sensor assembly and floor side airbag sensor RH.
The floor side airbag sensor RH detects impacts to the vehicle and sends signals to the airbag sensor assembly to determine if the airbags and pretensioners should be deployed.
DTC B162A/2A is stored when a malfunction is detected in the floor side airbag sensor RH.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Test Mode / Check Mode |
|---|---|---|---|---|
| B162A/2A | Side Airbag Sensor Assembly No. 2 (RH) | Any of the following conditions is met:
|
|
Does not apply to test/check mode |
DTC DETECTION CONDITIONS:
| Vehicle Condition | |||
|---|---|---|---|
| Pattern 1 | Pattern 2 | ||
| Diagnosis Condition | Ignition switch ON | ◦ | ◦ |
| Malfunction Status | Floor side airbag sensor RH malfunction | ◦ | - |
| Airbag sensor assembly malfunction | - | ◦ | |
| Detection Time | - | - | |
| Number of Trips | 1 trip | 1 trip | |
HINT:
DTC will be output when conditions for either of the patterns in the table above are met.