LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> C-HR LE >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance - Service Information >> 3ZR-FAE Battery >> Removal [08/2020 - ] >> Procedure

Removal [08/2020 - ]: Procedure

  1. PRECAUTION 
    NOTE:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal.

    Refer to PRECAUTION [05/2018 - ]

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    1. Loosen the nut and disconnect the cable from the negative (-) battery terminal.
      GTY771242Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE BATTERY 
    1. Disengage the 2 claws to remove the fusible link cover.
      GTY752896Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Loosen the nut.
      GTY752895Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the clamp and disconnect the cable from the positive (+) battery terminal.
      GTY773935Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the battery insulator from the battery.
      GTY765096Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Remove the bolt and No. 2 battery clamp.
      GTY771240Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    6. Remove the battery from the vehicle.
      GTY765095Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals