Caution / Notice / Hint

NOTE:

The following troubleshooting procedure is based on the assumption that the ECM is normal. Confirm that the SFI system is not malfunctioning before performing the following procedure.
1. w/ Canister Pump Module:
  Refer to HOW TO PROCEED WITH TROUBLESHOOTING [02/2017 - ]
2. w/o Canister Pump Module:
  Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2017 - 12/2021]
When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.