LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> C-HR LE >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Automatic High Beam System - Diagnostic Codes & Symptom Tests >> Automatic High Beam System >> Automatic High Beam System does not Operate or Operation Indicator does not Illuminate [08/2020 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • Before replacing the main body ECU (multiplex network body ECU), refer to Service Bulletin.*1
  • When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle. As a result, a DTC may be stored.
  • If the forward recognition camera has been replaced with a new one, be sure to perform Forward Recognition Camera Learning.

    One time recognition: Refer to TARGET ADJUSTMENT (ONE TIME RECOGNITION) [08/2020 - ]

    Sequential recognition: Refer to TARGET ADJUSTMENT (SEQUENTIAL RECOGNITION) [08/2020 - ]

    Driving Adjustment: Refer to DRIVING ADJUSTMENT [08/2020 - ]

    1. *1: w/ Entry and Start System
scientia non olet · About LEMON Manuals