Caution / Notice / Hint

NOTE:

When replacing the tire pressure warning ECU and receiver or tire pressure warning valve and transmitter, read the transmitter IDs and number of the transmitters (4 or 5) stored in the old ECU using the Techstream and write them down before removal.
It is necessary to perform initialization. Refer to INITIALIZATION [04/2018 -] after registration. Refer to REGISTRATION [04/2018 - 08/2019] , or refer to REGISTRATION [08/2019 -] of the transmitter IDs into the tire pressure warning ECU and receiver if the ECU and/or one of the valve and transmitters has been replaced.
If initialization is performed using the Techstream when the Data List is displayed for 10 minutes or more, initialization will not complete and the tire pressure warning ECU and receiver stores DTC C2177.