DTC U023A: Lost Communication with Front Camera Module [04/2018 - 08/2021]: Procedure

HINT: 

If DTC U023A is stored, the power steering system may be malfunctioning. Check for DTCs related to the power steering system first.

1. Check for DTCs.

   Chassis > EMPS > Trouble Codes 

   Result

   Result	Proceed to
   Power steering system DTCs are not output	A
   Power steering system DTCs are output	B

Result: 

B 

GO TO POWER STEERING SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [04/2018 - ] 

Result: 

A 

See step  2

1. Clear the DTCs.

   Chassis > LKA/LDA > Clear DTCs 

2. Make sure that the DTC detection conditions are met.

   HINT: 

   If the detection conditions are not met, the system cannot detect the malfunction.

3. Check for DTCs.

   Chassis > LKA/LDA > Trouble Codes 

   Result

   Result	Proceed to
   DTC U023A is not output	A
   DTC U023A is output	B

Result: 

A 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [04/2018 - ] 

Result: 

B 

REPLACE FORWARD RECOGNITION CAMERA. Refer to  COMPONENTS [04/2018 - 08/2021]