DTC C13AA: EPB High Temperature [04/2018 - 08/2021]: Procedure

1. With the overheat warning displayed on the multi-information display, wait for approximately 1 minute.
2. Check that the overheat warning has disappeared.

   HINT: 

   • Check the display after turning the engine switch off and on (IG).
   • After the warning has disappeared and the electric parking brake system returns to normal, clear the DTCs.

   Chassis > ABS/VSC/TRAC/EPB > Clear DTCs 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

END