DTC B2343: Position Initialization Incomplete [04/2018 - ]: Procedure

1. Check that the sliding roof ECU (sliding roof drive gear assembly) can be initialized.

   Refer to INITIALIZATION [04/2018 - ]

   OK

   Sliding roof ECU (sliding roof drive gear assembly) can be initialized.

   Result

   Proceed to
   OK
   NG

Result: 

NG 

REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY). Refer to  REMOVAL [04/2018 - 08/2021]  , or refer to  REMOVAL [08/2021 - ] 

Result: 

OK 

See step  2

1. Check the sliding roof auto operation.

   Refer to OPERATION CHECK [04/2018 - ]

   OK

   Auto operation operates normally.

   Result

   Proceed to
   OK
   NG

Result: 

NG 

REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY). Refer to  REMOVAL [04/2018 - 08/2021]  , or refer to  REMOVAL [08/2021 - ] 

Result: 

OK 

See step  3

1. Clear the DTCs.

   Body Electrical > Sliding Roof > Clear DTCs 

2. Check for DTCs.

   Body Electrical > Sliding Roof > Trouble Codes 

   OK

   DTC B2343 is not output.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

END (MALFUNCTION DUE TO INITIALIZATION FAILURE) 

Result: 

NG 

REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY). Refer to  REMOVAL [04/2018 - 08/2021]  , or refer to  REMOVAL [08/2021 - ]