DTC B1656: Seat Belt Buckle Switch (LH) [08/2019 - ]: Description
The seat belt buckle switch LH circuit consists of the airbag sensor assembly and front seat inner belt LH.
DTC B1656 is stored when a malfunction is detected in the seat belt buckle switch LH circuit.
| DTC Code |
DTC Detection Condition |
Trouble Area |
| B1656 |
One of the following conditions is met:
- The airbag sensor assembly detects a line short circuit signal, open circuit signal, short circuit to ground signal or short circuit to B+ signal in the seat belt buckle switch LH circuit for 2 seconds.
- A front seat inner belt LH malfunction.
- An airbag sensor assembly malfunction.
|
- No. 2 floor wire
- Front seat inner belt assembly LH (Seat belt buckle switch LH)
- Airbag sensor assembly
|