ABS Warning Light Remains ON [08/2015 - 08/2019]: Description

If any of the following is detected, the ABS warning light remains on.

• The skid control ECU connectors are disconnected from the skid control ECU.
• There is a malfunction in the skid control ECU internal circuit.
• There is an open in the harness between the combination meter and skid control ECU.
• The anti-lock brake system is defective.
• The voltage at terminal IG1 is high.
• The rear differential is locked.*

*: w/ Rear Differential Lock

HINT: 

It may not be possible to use the Techstream when the skid control ECU is abnormal.