VSC OFF Indicator Light does not Come ON [08/2015 - ]: Procedure
- CHECK CAN COMMUNICATION LINE
See step 2[08/2015 - 08/2019], or see step 2[08/2019 - ]
Result:
NG
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)
(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - 08/2019] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2019 - ] )
Result:
OK
See step 2
- READ VALUE USING TECHSTREAM (TRAC/VSC OFF MODE)
See step 5[08/2015 - 08/2019], or see step 5[08/2019 - ]
Result:
OK
GO TO METER / GAUGE SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)
(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - ] )
Result:
NG
See step 3
- INSPECT VSC OFF SWITCH
See step 6[08/2015 - 08/2019], or see step 6[08/2019 - ]
Result:
NG
REPLACE VSC OFF SWITCH
(Refer to REMOVAL [08/2015 - ] )
Result:
OK
See step 4
- CHECK HARNESS AND CONNECTOR (SKID CONTROL ECU - VSC OFF SWITCH)
See step 7[08/2015 - 08/2019], or see step 7[08/2019 - ]
Result:
OK
REPLACE MASTER CYLINDER SOLENOID
(Refer to DISASSEMBLY [08/2015 - ] )
Result:
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR