LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2021 >> 4Runner TRD Pro >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System - Service Information >> Navigation Antenna >> Installation [08/2019 - ] >> Procedure

Installation [08/2019 - ]: Procedure

  1. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ NAVIGATION ANTENNA) 
    1. Connect the connector.
    2. Install the 2 screws and navigation antenna assembly.
    3. Attach the clamp and 2 guides.
  2. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ TELEPHONE AND GPS ANTENNA) 
    1. Connect the connector.
    2. Install the 2 screws and navigation antenna assembly.
    3. Attach the clamp and 2 guides.
  3. INSTALL DEFROSTER NOZZLE ASSEMBLY 

    Refer to PROCEDURE - Step 8 [08/2019 - 08/2022] , or refer to PROCEDURE - Step 8 [08/2022 - ]

  4. INSTALL NO. 3 HEATER TO REGISTER DUCT 

    Refer to PROCEDURE - Step 9 [08/2019 - 08/2022] , or refer to PROCEDURE - Step 9 [08/2022 - ]

  5. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT 

    Refer to PROCEDURE - Step 10 [08/2019 - 08/2022] , or refer to PROCEDURE - Step 10 [08/2022 - ]

  6. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT 

    Refer to PROCEDURE - Step 11 [08/2019 - 08/2022] , or refer to PROCEDURE - Step 11 [08/2022 - ]

  7. INSTALL NO. 2 HEATER TO REGISTER DUCT 

    Refer to PROCEDURE - Step 12 [08/2019 - 08/2022] , or refer to PROCEDURE - Step 12 [08/2022 - ]

  8. INSTALL NO. 1 HEATER TO REGISTER DUCT 

    Refer to PROCEDURE - Step 13 [08/2019 - 08/2022] , or refer to PROCEDURE - Step 13 [08/2022 - ]

  9. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to INSTALLATION [08/2019 - 08/2022] , or refer to INSTALLATION [08/2022 - ]

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [08/2019 - 08/2022] , or refer to INITIALIZATION [08/2022 - ]

scientia non olet · About LEMON Manuals