DTC U0416: Invalid Data Received From Vehicle Dynamics Control Module [08/2019 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.

RECONFIRM DTC

Clear the DTCs.
Refer to DTC CHECK / CLEAR [08/2019 - ]

Check if the same DTCs are output.

Refer to DTC CHECK / CLEAR [08/2019 - ]

Result

Result	Proceed to
DTC U0122 and U0416 are output	A
Only DTC U0416 is output	B
DTC is not output	C

Result:

A

GO TO U0122. Refer to DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0122: Lost Communication With Vehicle Dynamics Control Module [08/2019 - ]

Result:

B

CHECK BRAKE CONTROL SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - ]

Result:

C

USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2019 - ]